Safe Operation Of Stenter

Comentários · 158 Visualizações

Regarding the operation of the Stenter, there are many issues that need attention.

Regarding the operation of the Stenter, there are many issues that need attention. As a user, we must not only check and maintain it in accordance with the specifications, but also be proficient in the correct operation method, and keep in mind the precautions. Only in this way can the operation of the tenter be more stable and safe.

    During the operation of the tenter, if you need to adjust its full width, then you should first turn the transmission components of the machine to check whether it is normal. Under confirmation of normal conditions, then adjust the full width to the desired width, at the same time adjust with the cloth edge tracker, and adjust the overfeed to a predetermined value.

   It should be noted that in order to ensure the good operation of the tenter, the staff needs to regularly lubricate and maintain the width adjustment device, and also carefully check whether the transmission system of the door width adjustment device is normal. Normally, within one month, or according to the appropriate adjustment of the use of equipment, the width control system should be tested and adjusted.

    In addition, during the operation of the tenter, the operation of the compressed air source also needs to be cautious. First, check whether the air pressure of each part is normal, and it should not be lower than the following requirements: traction rolling car pressure: 0.35MPa; tension frame: 0.25MPa; two-roll rolling car: 0.5MPa; cloth delivery device: 0.5MPa; check the action of each pneumatic valve Whether it is normal and meets the requirements before it can work.

    In addition to the above operational precautions, the threading operation of the Flat Screen Printer also needs to be treated with emphasis. When leading the cloth through the traction rolling car, the two-roll rolling car and the overfeed roller on the cloth feeding rack, care should be taken to avoid the roller from hurting the hands. When leading the cloth through the front storage rack, safety measures are also required to prevent the operator from falling.